Club Car Pioneer 1200, Руководство по техническому обслуживанию

Страница: 326 / 360

UNITIZED TRANSAXLE WITH DIFFERENTIAL LOCK Unitized Transaxle Installation
Page 16-44 2001 Pioneer 1200 Gasoline Vehicle Maintenance and Service Manual
16
Unitized Transaxle Installation, Continued:
28. Connect accelerator cable to actuator cam in the electrical box. Position the accelerator cable in
mounting slot in the wall of the electrical box and tighten mounting nuts to 18 in-lb (2.0 N·m) (Figure
16-108, Page 16-44). Install electrical box cover and tighten mounting screw.
29. Pull fuel line from impulse line fitting of the fuel pump, connect it to the carburetor and secure with a
hose clamp (Figure 16-109, Page 16-44).
30. Connect the impulse line to the fuel pump and secure it with the hose clamp (Figure 16-110, Page 16-
45).
31. Connect air intake hose to carburetor and secure hose clamp (Figure 16-111, Page 16-45).
32. Connect carburetor vent tube to carburetor and secure with hose clamp (Figure 16-112, Page 16-45).
33. Connect the differential lock cable end to the differential lock handle.
33.1. Connect the end of the differential lock cable to the differential lock handle (step 1) (Figure 16-
113, Page 16-46).
Figure 16-106 Connect Shifter Cable Figure 16-107 Engine Ground
Figure 16-108 Connect Cable to Cam Figure 16-109 Connect Fuel Line
SPRING RELEASE
NUTS
TOP VIEW
Club Car
TOP VIEW
ACCELERATOR CABLE
Club Car
CLAMP