Club Car Pioneer 1200, Руководство по техническому обслуживанию

Страница: 27 / 360

BODY AND TRIM Front Body Components
2001 Pioneer 1200 Gasoline Vehicle Maintenance and Service Manual Page 4-3
4
FRONT BODY COMPONENTS
Read WARNING and CAUTION on page 4-1.
DASHBOARD REMOVAL
1. Remove the dash panel. See Dash Panel Removal on page 4-3.
2. Remove five caps (1) from top of dashboard (2) (Figure 4-1, Page 4-4).
3. Using a T-30 Torx head socket, remove screws (3) and washers (4) from top of dashboard (2).
4. Using a 5/16 nut driver, remove five screws (5) from underside of dashboard and pull dashboard away
from front body (6).
5. Remove the steering wheel. See Steering Wheel Removal on page 7-1.
6. Remove dashboard from vehicle.
Dash Panel Removal
1. Remove dash panel. See step 2 of Key Switch Removal, Section 12, Page 12-15.
2. Disconnect wiring to electrical components.
Dash Panel Installation
1. Reconnect wiring to electrical components.
2. Reinstall the dash panel in reverse order of removal.
DASHBOARD INSTALLATION
1. Replace dashboard (2) and tighten screws (5) to 11 in-lb (1.2 N·m) (Figure 4-1, Page 4-4).
2. Secure dashboard to front body with five screws (3) and washers (4). Tighten screws to 45 in-lb (5.1
N·m).
3. Install five caps (1).
4. Install dash panel.
5. Install steering wheel. See Steering Wheel Installation, Section 7, Page 7-3.
FRONT BODY REMOVAL
1. Remove five caps (1) from top of front body (6) (Figure 4-1, Page 4-4).
2. Using a T-30 Torx head socket, remove screws (3) and washers (4) from top of front body (6).
3. Using a phillips head screwdriver, remove the six Tuflok fasteners (7) from sides and two from front of
front body.
4. Disconnect light wiring harness from headlight assemblies.
5. Pull front body forward to clear dashboard and lift off vehicle (Figure 4-1, Page 4-4).