Club Car FE 350, Дополнение к руководству по обслуживанию и ремонту

Страница: 242 / 280

18
Unitized Transaxle Removal UNITIZED TRANSAXLE
UNITIZED TRANSAXLE REMOVAL
See General Warning on page 10-1.
1. Turn the key switch to the OFF position and remove the key, and place the Forward/Reverse handle in the
NEUTRAL position.
2. Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline Vehicles, Section 10,
Page 10-2.
3. Close the fuel shut-off valve on fuel tank (Figure 15-21, Page 15-29 or Figure 15-22, Page 15-29) .
4. Detach all wires, hoses, etc. connecting the powertrain to the vehicle.
4.1. Disconnect the carburetor vent tube from the carburetor (Figure 18-10, Page 18-8) .
4.2. Disconnect the air intake hose from the carburetor (Figure 18-11, Page 18-8) .
847
Figure 18-10 Carburetor Vent Tube
561
Figure 18-11 Air Intake Hose
4.3. Disconnect impulse line from fuel pump (Figure 18-12, Page 18-8) .
4.4. Loosen the hose clamp and then disconnect the fuel line from the carburetor. To prevent spilling fuel, the
disconnected end of the line can be plugged with a 1/4-inch bolt (Figure 18-13, Page 18-8) .
562
Figure 18-12 Impulse Line
846
Figure 18-13 Fuel Line
Page 18-8 2009 FE 350 Maintenance and Service Supplement