Club Car EX40D, Руководство по обслуживанию, ремонту и восстановлению, Страница: 47 / 64

- 43 -
9-3 EFI SYSTEM
9-3-1 CHECKING ECU CONNECTOR
1 . Disconnect the connector, and check their terminals
for contamination and deformation .
2 . Check to see that cable is not broken or terminals
are not shelled off .
3 . If any damaged parts are found, repair or replace
them .
PIN ASSIGNMENT OF ECU CONNECTOR
ECU
Fig .9-2
NOTE ;
When replacing the ECU, the throttle body also
needs to be replaced.
IMPORTANT ;
Connect connectors surely after checking.
110 111 112 113 114 115 116 117 118 10 11 12 13 14 15 16 17 18
101 102 103 104 105 106 107 108 109 1 2 3 4 5 6 7 8 9
JAPAN AVIATION ELECTRONIC INDUSTRY
PARTS No .MX23A18NFG
COLOR : GRAY
JAPAN AVIATION ELECTRONIC INDUSTRY
PARTS No .MX23A18NF1
COLOR : BLACK
101 INJECTOR CONTROL 1 FUEL PUMP
102 N .C . 2 N .C .
103 N .C . 3 IGNITION GND
104 N .C . 4 N .C .
105 N .C . 5 N .C .
106 ENGINE TEMP . SENSOR 6 N .C .
107 N .C . 7 OIL SENSOR SWITCH
108
N .C .
8
K-LINE
109 IGNITION SIGNAL 9 BATT . +12V
110 INJECTOR (VB+) 10 POWER GND
111 N .C . 11 DIAGNOSIS LAMP
112
N .C .
12
ACCELERATOR PEDAL SWITCH
113 M .A .P . SENSOR 13 N .C .
114 N .C . 14 N .C .
115 SENSOR GND (ENG .TEMP .) 15 N .C .
116
5V ref .
16
N .C .
117 SENSOR GND(M .A .P .) 17 N .C .
118 N .C . 18 SYSTEM GND