Club Car DS Villager 4, Руководство по техническому обслуживанию и ремонту, Страница: 138 / 510

7
Front Suspension Components STEERING AND FRONT SUSPENSION
4. Remove the bolts (1) from the bottom of each kingpin (2) (Figure 7-15) .
2
1
5
7
6
4
3
1312B
Figure 7-15 Leaf Spring Removal
5. Remove the four bolts (3) and bottom spring plate (4).
6. Remove leaf spring (5).
7. Check the condition of the urethane bushings (6) and steel sleeves (7). Replace any that are worn or damaged.
LEAF SPRING INSTALLATION
1. Install the urethane bushings (6) and steel sleeves (7) into leaf spring eyes (Figure 7-16) .
2
1
5
7
6
4
3
1312B
Figure 7-16 Leaf Spring Installation
2. Install the leaf spring (5), bottom spring plate (4), and four bolts (3). Tighten the bolts in a crisscross pattern to
37 lb·ft (50 N·m).
3. Install the kingpins (2) on the leaf spring with the bolts (1). Tighten the bolts to 30 lb·ft (41 N·m).
4. Install the front wheels.
5. Adjust the camber and toe-in.
6. Electric Vehicle: Connect the batteries.
Gasoline Vehicle: Connect the battery and spark plug wire.
Page 7-14 2020 Precedent,Villager 2 and 4 Maintenance and Service Manual