Club Car Carryall 500, Руководство по техническому обслуживанию и ремонту, Страница: 83 / 456

WHEEL BRAKE ASSEMBLIES Brake Adjustment
6
BRAKE CLUSTER ADJUSTMENT
1. Chock the wheels.
2. To provide slack in the brake cables, loosen the equalizer retaining nuts (1 and 5) on the equalizer rod (2)
(Figure 6-15, Page 6-7) .
3. Loosen the front brake equalizer rod (Figure 6-16, Page 6-7) .
2 5
6
1
4
1 3 2
5
6
2801
Figure 6-15 Rear Equalizer Adjustment
2802
Figure 6-16 Front Equalizer Adjustment
4. Remove the dust cover (4) on the left and right rear brake cluster assemblies (Figure 6-17, Page 6-7) .
4
5
4
5
2804
Figure 6-17 Rear Brake Adjustment Bolt
2803
Figure 6-18 Front Brake Adjustment Bolt
5. Use a torque wrench and a 7 mm 8–point socket or Club Car brake adjustment tool (CC P/N 1013582) to turn
the brake adjustment bolt (5) on each brake clockwise until it is tightened to 15 ft·lb (20.3 N·m) then back off
5 clicks.
See following NOTE
NOTE: If a wheel can still be turned by hand after step 4, inspect the brake clusters and clean and/or replace all
parts that do not work properly.
6. Repeat procedure at front brake clusters.
2017 Carryall 500 and 700 Maintenance and Service Manual Page 6-7