Club Car CARRYALL 252 2007, Руководство по техническому обслуживанию и ремонту

Страница: 67 / 536

WHEEL BRAKE ASSEMBLIES Brake Adjustment (Manually-Adjusted Brakes)
6
BRAKE ADJUSTMENT (MANUALLY-ADJUSTED BRAKES)
See General Warning on page 1-1. See also WARNING on page 6-1.
CAUTION
• Pedal group adjustment must be within specifications prior to beginning brake adjustment. Perform
the appropriate pedal group adjustment.
– For gasoline vehicles, refer to See Pedal Group Adjustment – Gasoline Vehicles, Section 5, Page
5-10.
– For electric vehicles, refer to See Pedal Group Adjustment – Electric Vehicles, Section 5, Page 5-15.
NOTE: All brake cluster components must be clean, lubricated, and in good working condition prior to beginning
brake adjustment.
All wheels must be installed on the vehicle and lug nuts properly tightened. See Wheel Installation, Section
8, Page 8-1.
BRAKE CLUSTER ADJUSTMENT
1. Chock wheels.
1.1. To provide slack in the brake cables, loosen the equalizer retaining nuts (1 and 5) on the equalizer rod
(2) (Figure 6-13, Page 6-7) .
2. Four-wheel brake vehicles only: Loosen the front brake equalizer rod (Figure 6-14, Page 6-7) .
3. Remove the dust cover (4) on the left and right rear brake cluster assemblies (Figure 6-15, Page 6-8 and
Figure 6-16, Page 6-8) .
1
3
2
4
1 3 2
5
6
Figure 6-13 Rear Equalizer Adjustment Figure 6-14 Front Equalizer Adjustment
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual Page 6-7