Club Car CARRYALL 252 2007, Руководство по техническому обслуживанию и ремонту

Страница: 37 / 536

BODY AND TRIM Rear Fender
4
REAR FENDER
See General Warning on page 1-1.
REAR FENDER REMOVAL
Vehicles with taillights:
1. Remove taillight assembly.
1.1. Remove the two screws that secure taillight to the rear fender.
1.2. Disconnect the three taillight wires.
2. All vehicles:
Remove two nylon lock nuts (3), flat washers (1), and 1/4 x 1 bolts (2) from front of fender (6) (Figure 4-3,
Page 4-8) .
3. Remove two nylon lock nuts (3), flat washers (1), and 1/4 x 1 bolts (2) from the top of fender (6).
4. Vehicles with rear reverse buzzer:
Remove the rear reverse buzzer.
4.1. Remove pan-head screws connecting reverse buzzer to rear fender (6) and disconnect the two wires
from the reverse buzzer.
5. All vehicles:
Remove fender (6) from vehicle (Figure 4-3, Page 4-8) .
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual Page 4-7