STEERING AND FRONT SUSPENSION
Rack and Pinion
7
3.
Remove both drag links (19)
19
2048
Figure 7-13
Drag Link Ball Joint
2049
Figure 7-14
Drag Link
4.
Remove both bellows clamps (metal clamps or plastic wire ties)
See following NOTE.
NOTE:
If the dust seal bellows are secured with a metal clamp, remove the clamp. Do not reuse the clamp when the
rack and pinion is reassembled. Use a plastic wire tie to secure the dust seal bellows.
2050
Figure 7-15
Dust Bellows Clamp
5.
Remove the two hex nuts from the inner ball-joint ends, and remove both of the dust seal bellows.
6.
Remove the rack screw nut (8), rack guide screw (7), rack guide pressure spring (6), and the rack guide
(5)
7.
Remove the dust seal
2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual
Page 7-9
Содержание Carryall 1500 2016
