Club Car Carryall 1500 2016, Руководство по техническому обслуживанию и ремонту

Страница: 419 / 436

HYDRAULIC ATTACHMENT SYSTEM Hydraulic Pump Assembly
19
2303
Figure 19-87 Park Brake Cable Bolt
2304
Figure 19-88 Cover Edge of Heat Shield
9. Remove bolt securing the passenger side park brake cable to the chassis, at the air filter, and move cable
forward
(Figure 19-87, Page 19-45) .
10. Cover edge of heat shield to protect hoses and wires while lifting pump assembly from chassis (Figure 19-88,
Page 19-45) .
11. Remove wire tie securing hoses/wire harness to chassis (Figure 19-89, Page 19-45) .
2305
Figure 19-89 Wire Tie to Chassis
2306
Figure 19-90 Pump To Cradle Bolts
12. Lift pump and cradle up and, while guiding the hoses/wiring around heat shield, place on top of chassis. See
following WARNING and CAUTION.
WARNING
• To avoid risk of injury, use proper lifting techniques or, if available, a hoist to lift the pump assembly
from the chassis.
CAUTION
• Use care to avoid damaging the hoses and wires when moving them around the heat shield.
2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual Page 19-45