Club Car Carryall 1500 2016, Руководство по техническому обслуживанию и ремонту

Страница: 401 / 436

HYDRAULIC ATTACHMENT SYSTEM Cylinders
19
1 2
1
2
2254
Figure 19-38 Hoses
2255
Figure 19-39 Remove Rod End Pins
3. Remove retaining pin (1) from the base end of the hydraulic cylinder (Figure 19-40, Page 19-27) .
4. Remove pivot pin (2) (Figure 19-41, Page 19-27) from the base end of the hydraulic cylinder and remove cylinder.
1
2
2256
Figure 19-40 Remove Retaining Pin
2257
Figure 19-41 Remove Pivot Pin
Auxiliary Cylinder Installation
1. Reverse the removal procedure to install the auxiliary hydraulic cylinder in the attachment.
2. Install the retaining pin (1) as shown (Figure 19-39, Page 19-27) . See following NOTE.
NOTE: If installed incorrectly, this retaining pin will restrict attachment travel.
2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual Page 19-27