Club Cannon MICRO JET MKII, Руководство пользователя

Страница: 13 / 20

ATTACH BARREL
Screw fitting of barrel to CO₂ outlet. Set desired angle of
jet, hand tightening to temporarly hold in place. Use either a
11/16(17mm) wrench or adjustible wrench to fully tighten fitting
securely.
1.
CONNECT RELAY PACK
Using our Power Pack, DMX relay pack, or simply any
controllable power source
3.
ATTACH HOSE
Follow the steps outlined on CO₂ SETUP GUIDE for proper
CO₂ setup.
Read through the entire manual for more in-depth information,
including safety procedures and best practices.
5.
INSERT POWER MODE ADAPTER
The Micro Jet MKII includes a 1/4” TS mono plug that can be
inserted into the 3 pin XLR port output. When inserted, jet will
act as a power controlled jet when powered on until removed.
2.
CONNECT DMX
The last step is to attach a DMX controller like “The Button” or
“ShoMaster” to control the relay pack.
4.
QUICK START POWER GUIDE
11