www.club-3d.com
C S V-1 4 3 0 M A N U A L
USB 3.0 3-Por t Hub with Gigabit Ethernet
Driver Installation on Windows™ and Mac OSX®
1.
Insert the provided CD into your disc drive. Then locate and double-click the
setup.exe
file under x:\Driver\Windows where x is your disc drive letter.
2.
When you click
setup.exe,
you could see the screen as below
Caution: DO NOT connect the
USB HUb with
Ethernet adapter to your
computer before
you install the provided driver. You will be instructed
to do so later.
3.
Click Finish to complete Ethernet Driver.
Now the installation is completed. You can connect the adapter to a network device by an
Ethernet cable:
1. Connect an Ethernet cable to the Ethernet port on the adapter.
2. Connect the other end of the Ethernet cable to your network hub, switch or router.
The Link LED should light up green to indicate a proper physical connection between the
adapter and the network. If the Link LED doesn’t light up, please verify the cable
connections between all the network devices.
*Actual strings depend on your operation system. These screen shots are from Windows
®
8.1 and might vary slightly for each operation system.
