www.cls-led.com
www.cls-led.com
- 3 -
- 4 -
Optional accessories
911465
CLS LD serie GII adapter cable XLR3 male to RJ45
911468
CLS LD serie GII adapter cable RJ45 to XLR3 female
911366
CLS LDC adaptercable LDC to XLR7 including terminator
911367
CLS LDC adaptercable LDC to SmartConnect system
911368
CLS LD serie adapter cable RJ45 to XLR3 female
113100
CLS LDC-41 connection cable to XLR7 including terminator
113110
CLS LDC-41 connection cable to Luxo 3 RGB
706995
CLS BT20.24 LED power supply 24VDC 2-VA 85-264VAC
707011
CLS BT45.24 LED power supply 24VDC 45VA 85-264VAC
707012
CLS BT75.24 LED power supply 24VDC 75VA 85-264VAC
707013
CLS BT120.24 LED power supply 24VDC 120VA 85-264VAC
707014
CLS BT240.24 LED power supply 24VDC 240VA 85-264VAC
707018
CLS BT75.48 LED power supply 48VDC 75VA 85-264VAC
707019
CLS BT120.48 LED power supply 48VDC 120VA 85-264VAC
707020
CLS BT240.48 LED power supply 48VDC 240VA 85-264VAC
Ambiance
Max. 40º
Block access
below the work
area when
maintaining
the unit
Use a source
of AC power
that complies to
local electrical
codes
Disconnect the
power supply
before installing
or maintaining
Don’t install in
a flammable
or explosive
area
Warning!
Some surfaces
can be hot
Do not stare
into the LED
Don’t modify
or install
genuine parts
on this product
Qualified
technician
Make sure all
connectors are
connected
properly
Wall
170 gr
IP40
Max. 0,5 Watt
48 VDC
CONTENT
SAFETY INFORMATION
MEASUREMENTS
The CLS LDC-41 is a DMX controllable LED dimmer, which has 4 current controlled DC outputs. The
current can be adjusted in steps of 50mA from 350 to 1000mA per channel. Each channel can drive 1 to
15 LEDs in series. Equipped with 4 channels the LDC-41 is suitable for controlling the newest generation
of LED fixtures, RGBW or RGBA. This makes it possible to connect 2 to 12 RGB or even RGB(A/W) fixtures
on one driver. Unique is the DIN-rail mounting possibility of the new and small housing. The LDC-41 is
equipped with a user friendly menu structure, which offers some smart solutions for installers to test & set
up an installation.
25 mm
125 mm
110 mm
15 mm 15 mm
110 mm
Output connector
Power input connector
Display
Up button
DMX input/output
DMX input/output
Menu button
Down button
LAY-OUT DESCRIPTION
INTRODUCTION
Spefifications
Power Supply:
48VDC
Idle Power:
Max. 0,5 Watt
Power consumption:
Max. 185 Watt
LEDs in serie:
1-15 per channel
Output:
4 channels
Output voltage:
2-45VDC
Output current:
350-1000 mA
DMX protocol:
DMX512/1990
Data in/out:
RJ45
Housing: Plastic
IP rating:
IP40
Measurements:
110 x 25 x 125 mm (hxwxd)
Mounting: DIN-rail
Weight:
210 gr
Working temperature: -10 °C to +60 °C