6
5
PROGRAMMING
3
2
1
4
To store the
configuration
press & hold
the button for
3 seconds
Via DMX the Focus can be configured. After setting the DMX to the desired values just press the
button on the Focus PCB. Press and hold the button for approximately 3 seconds (step 3), when
button is pressed the focus will turn on and when programming has finished the Focus will turn off
again. When light does not turn off after 3 seconds repower and try again.
Addressing
To configure address (1-255) set data on DMX channel 1:
0 = no changes are made.
1-255 = address is set to 1-255.
To configure address (256-510) set data on DMX channel 2:
0 = no changes are made.
1-255 = address is set to 256-510.
Examples:
Address 132 => set data 132 on DMX channel 1.
Address 278 => set data 23 on DMX channel 2.
Static brightness
When DMX fails or is not present the programmed brightness will become active.
To configure the static function set DMX channel 3 to the desired brightness.
0 = no changes are made.
1 = function disabled.
2-255 = brightness of the fixture.
Soft dim option
When active the Focus will have soft dim curve.
To configure the soft dim function set data on DMX channel 4
0 = no changes are made.
<127 = function turned off.
>127 = function turned on.
