2.
Infrared LEDs
Infrared LEDs let you see objects in the darkness.
3.
CDS sensor
Turn the Infrared LEDs off during daytime, and turn it on at night automatically.
4.
C-mic for Indoor camera only
High sensitivity condenser microphone.
5.
4-pin Din jack
Connect the one end of cable to this jack.
6.
Tripod screw for Indoor camera
There is a tripod screw on the bottom of the indoor camera (Refer to installation).
7.
Mounting bracket
INSTALLATION
1.
Attach the mounting bracket to the wall or ceiling, wherever you want to install the camera. Locate
a wall stud or ceiling joist and secure the mounting bracket using the supplied screws.
2.
Install the camera to the mounting bracket and firmly tighten the swivel.
3.
Connect the one end of cable (supplied) to the Din jack on the rear of the camera and the other end
of cable to the monitor. Make sure that two arrows on the top of them should be aimed at each
other