background image

Limited 2Year Warranty 

This warranty gives the original purchaser specific legal rights and you may also have other rights, which 
may vary from state to state. If our products do not function because of any defect in material or 
workmanship, we will repair it for free for 2 year on parts and labor from the date of original purchase. This 
warranty does not cover modification, abuse, incidental or consequential damages unless the state of 
owner’s residence specially prohibits limitations on incidental or consequential damages. 

 

 

How to obtain Factory Service 

z

  Original purchaser must fill out the warranty card and mail it to the factory with the model number, 

serial number and the date of purchase. 

z

  We will repair or replace, and return the system to the owner under this limited warranty. 

z

  Please pack the system carefully and securely using the original packing materials, and send it 

prepaid and insured to: 

13073 E. 166th St, Cerritos, CA 90703

z

  Please include a check for $50.00 to cover the cost of return postage and handling. If the system is 

returned within the warranty period, please include a proof of purchase. If the system is out of 
warranty, you will receive an estimate of the repair cost for your approval before repair work will be 
started 

 
 
 
 

- 65 - 

Содержание C1704DVR







































































Отзывы: