manualshive.com logo in svg

Clover Systems DVX-4, Руководство по эксплуатации

Поделиться
Скачать
Clover Systems DVX-4 Скачать руководство пользователя страница 14

6 

         DVX 

Instruction 

Manual 

Test Controls 

Start At / Stop At 

Sets the start and stop points for the CIRC, PIPO, Beta/Jitter, and Verify tests.  This allows you to test only portions of 
a disc.  Default values are the begin and end of the information area.  For CDs, you can enter new values in Minutes, 
Seconds, and Frames, or Physical Sectors

2

.  For DVD discs, enter Logical Block Address. 

Start Button 

Starts the error and/or analog tests. 

Stop Button 

Stops the current test in progress. 

MSF Button (CD Only) 

Causes the START and STOP points to be displayed and entered in Minutes, Seconds, and Frames. 

Sectors Button (CD Only) 

Causes the START and STOP points to be displayed and entered in Physical Sectors (see 

Logical Blocks and Sectors

 

pg. 48). 

Sum1, Sum8 Checkboxes (DVD Only) 

These checkboxes select which tests are performed when you press START.  All of the tests selected will be performed 
in sequence.  To measure all error rates, select Sum1 and Sum8.  If you also want to perform the analog test, check 
Analog also.  If both tests are selected, they will be performed in the order: Sum8, then Sum1. 

Analog Checkbox 

If checked, will cause the Analog test to be automatically performed after the error tests.  If AMM-1 is not installed, 
only Beta and Jitter will be measured.  Test speed is automatically set to 4X (CD) or 2X (DVD). 

Analog Only Checkbox (CDs Only) 

If checked, only the Analog test will be performed.  This checkbox does not appear in the DVD view, because only the 
analog test will be performed if the Analog box is checked and Sum1 or Sum8 are not checked. 

Blank Test Checkbox 

Only applicable when a blank disc is in the drive.  Performs Focus and Tracking Error tests only.   

QuickScan

TM 

When checked, the test time is reduced by about 3½ times for CDs and 10 times for DVDs.  48X test speed on a CD 
then becomes effectively 168X, and 16X DVD test speed becomes 160X.  See the 

QuickScan

 section on page 10. 

The Status Bar 

The status bar at the bottom of the main window shows the drive status, drive speed, and progress of the current test.  
The status bar can be viewed or hidden by checking or un-checking 

View

 | 

Status Bar

 in the main menu. 

The drive status shows what the DVX drive is doing at all times.  When QuickScan is enabled, “QS” is appended to the 
current drive speed indicator. 

                                                           

2

 See H

Logical Blocks and Sectors

H on pg. 48 

Содержание DVX-4





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды