USER MANUAL :
DOCUMENT NAME
1.6
LED and button functions
On the front of the logger, there are 2 LED's and a touch sensitive 'SELECT' button.
is the Bluetooth reset button.
1.6.1
LED functions
Blue LED - Bluetooth status
Flashing indicates the Bluetooth is ready to receive
Solid light indicates and active connection
Red LED - Logger status
Solid - Logger is in Command Mode (normally accompanied by an active Bluetooth connection)
Fast flash - Logger is currently initiating a connection to the serve
Slow Flash - Connection has been established to the server
1.6.2
Pushbutton Functions
SELECT touch button - Please note, this button is touch sensitive in order to maintain the waterproof status of the housing.
Single short push will toggle the Bluetooth r
A push of more than 3 seconds will result in the logger establishing a connection
datalog.
BLUETOOTH RESET button - This button is used to reset the Bluetooth interface in the event of a lost password or generally
configuration loss.
The Bluetooth interface of this logger can be configured to have a access password which will limit external ac
those issued the password. Should this password get lost, the logger can be opened and the Bluetooth interface reset to
disable the security. It is advisable to then connect to the logger again and setup a new password. This is explained later
this document.
MANUAL : CDS551 CIRRUS MODBUS LOGGER
NAME
CLASSIFICATION
DATE
PAGE
's and a touch sensitive 'SELECT' button. Internally on the reverse side of the lid
luetooth is ready to receive an incoming connection
Solid light indicates and active connection
Logger is in Command Mode (normally accompanied by an active Bluetooth connection)
Logger is currently initiating a connection to the server
Connection has been established to the server
lease note, this button is touch sensitive in order to maintain the waterproof status of the housing.
the Bluetooth radio on and off.
A push of more than 3 seconds will result in the logger establishing a connection to the server
This button is used to reset the Bluetooth interface in the event of a lost password or generally
The Bluetooth interface of this logger can be configured to have a access password which will limit external ac
those issued the password. Should this password get lost, the logger can be opened and the Bluetooth interface reset to
disable the security. It is advisable to then connect to the logger again and setup a new password. This is explained later
PAGE
Internally on the reverse side of the lid
Logger is in Command Mode (normally accompanied by an active Bluetooth connection)
lease note, this button is touch sensitive in order to maintain the waterproof status of the housing.
to the server and uploading its
This button is used to reset the Bluetooth interface in the event of a lost password or generally
The Bluetooth interface of this logger can be configured to have a access password which will limit external access to only
those issued the password. Should this password get lost, the logger can be opened and the Bluetooth interface reset to
disable the security. It is advisable to then connect to the logger again and setup a new password. This is explained later in