南京晨锐腾晶激光科技有限公司
NANJING CRD LASER TECHNOLOGY CO., LTD
Operation
Fan connection and installation requirements
:
Shell on the chassis shall be fitted with exhaust devices (exhaust fan can be
installed in the chassis in whole or in the middle of both sides of the chassis)
and
the chassis are required to have vents
，
Chassis to ensure the air can be recycled,
heat can be promptly discharged from the chassis to ensure a good thermal
performance lasers.
Laser front and back covers are laser’s mirror stand, cannot hard contact with any
part of the machine frame, or the laser may be damaged. Could use soft materials
contact with the front cover to seal the light path and protect the laser window
lens.
The installation of a fixed laser floor thickness shall be not less than 8MM, in
order to prevent equipment working on the laser optical vibration impact.
Choice and connection of Power:
◆
DC switching power chose by customer will be matched to the requirements
CR30C lasers, Voltage is 48V, current should be not less than 12.5A.
◆ T
he diameter of connecting wire between DC power supplier and laser tube
should be larger than
2.5mm
2
. The connection cannot be reversed between the
power and laser; otherwise it will damage RF Driver IV
Control signals connections:
