4
4.)
F
E
Illustration # 3
D
P2
P1
F
5.)
P6
B
P6
B
C
C
Illustration # 4
P5
P6
Illustration # 5
O R
Attach 2 Locking Casters (E) and 2 Casters (F) to the bottom of the Left Leg (P1) &
Right Leg (P2) as shown in illustration #3. Tighten all casters with Caster Wrench (D).
6.) Your Genius Stand is shipped with two Long
Brackets(P6) installed at the top. You may need
to change these brackets and use two Short
Brackets(P5) if your board is thinner.
See illustration #5.
Place a Threaded Square Washer(C) on top of a Long Bracket(P6) and insert both into one of
the bracket holders at the bottom of the Stability Panel(P4). Secure the two using one
Knob(B) as shown in illustration #4. Repeat this Step for the other side.
