![CloudCuddle Junior Bedtent Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/cloudcuddle/junior-bedtent/junior-bedtent_manual_2626366005.webp)
7
8
NL
5.
Loosen the straps underneath the magtress and remove the cover (photo 23).
6.
Press as much air as possible out of the tubes by rolling up the CloudCuddle, starting
at the end of the legs. Make sure that the leg with the open air valve remains
unobstructed, otherwise the air cannot be expelled. If necessary, view the instruction
video on the website (under ‘product/use’).
Checks When Dismantling
•
You deflate the CloudCuddle by unscrewing the rear valve cap (Round with
textured edge). Be aware that the air in the tubes is under pressure and is
released with a loud bang when you unscrew the cap.
•
Check if the clips on top are open.
C. Maintenance, Clearing and Storage
Maintenance
The CloudCuddle is free of maintenance.
Clearing
1.
Place mesh and tubes on top with the mattress cover underneath.
2.
Put every ‘sock’ in the adjacent corner of the mattress cover
(photo 24)
.
3.
Then fold the mattress cover inwards
(photo 25)
.
4.
Fold both sides lengthwise towards the middle. The mesh and the tubes are now
‘wrapped up’ in the mattress cover
(photo 26)
. This way the CloudCuddle is optimally
protected during transport.
5.
Roll up the CloudCuddle (tightly) and place it back in the bag
(photo 27)
Storage
•
Take care the sheet is clean. If required,you can take the sheet out,wash it and
store separately.
•
Store the CloudCuddle in a bag and store it in a dry area at room temperature.
•
While travelling or in storage:Avoid heavy objects on top of the CloudCuddle.
•
Temperature CloudCuddle frame:
the CloudCuddle frame may never be exposed to
temperatures above 50 degrees Celsius. This risk is apparent when it is within a car that
is parked in bright sunlight. The temperature can then easily rise above this value.
V. WASHING INSTRUCTIONS
A. Thermal disinfection CloudCuddle
•
Wash at a temperature of 60°C.
•
Use a standard wash programme with spin.
•
Do not use shortened wash programmes.
If disinfection is not required, we recommend a lower temperature in order to preserve the
fabrics.
B. General
•
Detergent: All detergents which are suitable for the cleaning of clothing and linen is
suitable for washing the CloudCuddle cover and sheet.
•
The sheet can be unzipped and washed separately.
•
The inflatable frame may not be machine-washed.
•
The sheet and cover can both be washed at 60 degrees for reasons of hygiene. We
recommend a lower temperature to preserve the fabrics.
•
Please note that the blue fabrics may transfer colour slightly to the white fabrics. The
higher the temperature at which the cover is washed, the more colour will rub off onto
the fabric.
•
The sheet can be put in the dryer, the rest of the cover cannot be put in the dryer. For
durability, it is best to dry the sheet cold or on a clothesline.
C. Washing The Sheet
Both for unzipping and for zipping in, you do not need to deflate the CloudCuddle or
remove it completely from the mattress. It is essential for the safety of the CloudCuddle
that all fabrics are as tight as possible. As a result, the CloudCuddle requires some room to
maneuver, particularly when zipping in, as described below.
Unzipping:
•
Make sure there’s room to maneuver the CloudCuddle. Loosen the straps which
attaches the CloudCuddle to the frame. Then partially slide the CloudCuddle off the
mattress
(photo 28)
.
•
Place your hand between the mattress and the sheet at the bottom of the
CloudCuddle. This is where the loop of the sheet zip is located
(photo 29)
.
•
Pull the zip open until the flap is visible from the top, then unzip the sheet completely
from the top.
Photo 30:
Take out the frame.
Photo 31:
Place tube in bottom part of white sock.
Photo 32:
The seam of the tube runs alongside the
zipper.
Photo 28:
Partially slide the CloudCuddle off the
mattress.
Photo 29:
Put hand between mattrass and sheet to
reach the runner.
Photo 24:
Put each ‘white sock’ in a corner of the
mattress cover.
Photo 27:
Roll up the CloudCuddle.
Photo 26:
Fold 1x lengthways to the center.
Photo 25:
Tube cover and mesh on top.
Photo 21:
Open snap fastner.
Photo 22:
Open rear part of valve and
release air.
Photo 23:
Loosen the straps.
EN