Tool required:
Tool required:
Attach legs to crossbar ends using 8 pcs M6*12 screws.
Piece required
：
A Screws
Piece required
：
B Screws
A Screws 8pcs
A Screws 4pcs
B Screws 8pcs
4mm hex key
Tool required:
Piece required
：
A Screws
4mm hex key
Tool required:
4mm hex key
4mm hex key
Attach foot margins to leg using 8 pcs M6*14
screws and tighten with 4mm hex spanner.
Attach brackets to each crossbar end using
4 pcs M6*12 screws.
Begin by loosening the 8pcs M6*10 screws (included as packaged).
Align the crossbar with pre-drilled holes (if included) and then tighten
the 8pcs screws.
