Closley C32HDIB, Инструкция по эксплуатации

Страница: 24 / 28

Simple Troubleshooting
Simple Troubleshooting
SYMPTOM
DEALING METHOD
Check the power connection.
Pull the plug out, wait for 60 seconds, then reconnect the power
and run the set
Check the antenna connection.
Try other TV channel due to the TV station problem.
Modify the brightness or contrast setting.
Increase the volume.
Check that if the set is on the mute state or not.
Check the voice setting condition.
Check the voice mode setting condition.
Check the antenna connection
NO SOUND
NO PICTURE
NO POWER
ABNORMAL COLOR
NO RESPONSE OF THE
REMOTE CONTROL
The SCREEN FLASH IN
VGA MODE
SOME INTERFERE IN THE
VGA MODE
CLEAN THE TV SET
COLOR SPOT
Check the effect of the batteries, if needed, please replace the
batteries or clean the remote sensor window.
The distance between the set and the remote control should be
less than 6 meters.
The parameter is too big.
Please use safety mode when restart the PC, and set the
parameter of the monitor according to the instruction.
Please modify parameter of the monitor according to the instruction.
Please pull the plug out when clean the LCD screen. Using soft,
clean cloth to wipe it off. If need to clean further, please use dry
cloth, don’t use naphtha or other thinner liquid.
Performs
This product uses high definition LCD panel, and the panel
has its special character, there maybe existed some color
spots, so when the user find few color spots it's not a quality
problem.
The standard for inspecting this panel is the same which is
out of the scope to replace the product.
21