Getting Started
5
•
If you are trimming for the first time, start by
using the AccuControl comb at the maximum
trimming length setting (#9) to prevent
accidentally trimming hairs too short. As you
become familiar with the settings, adjust
Hair Length Selector to desired trimming
length. Selector will “click” into position at
each setting.
•
Switch the Groomer ON.
•
To trim in the most effective
way, move the Groomer
against the direction of hair
growth. Make sure the
surface of the Guide Comb
always stays in contact with
the skin (fig.5).
NOTE: Since all hairs do not grow in the same
direction, you may want to try different
trimming directions (i.e. upwards, downward or
across). Practice is best for optimum results.
If a lot of hair has accumulated in the Guide
Comb, remove the comb and blow and or/
shake the hair out of the comb. You can also
use the cleaning brush provided to remove
hair from the comb area.
•
Fig 5
TABLE 1. BEARD TRIMMER
SETTIN
REMAINING HAIR
LENGTH (MM)
1 Stubble
2
2 Closely cropped
4
3 Short
6
4 Medium short
8
5 Medium
10
6 Medium long
12
7 Long
14
8 Extra Long
16
9 Longest
18
REMEMBER:
You must reset the hair length selector
back to your desired setting every time
you replace the guide comb on the
appliance. The remaining hair length
corresponds with the smallest distance
between the cutting blade and the spot
where the comb is in contact with the
skin. Cutting without the comb
attachment or setting the AccuControl
guide comb to #1position will result in
a stubble beard look.
Helpline No. UK/Northern Ireland: 0845 543 9028
Helpline No. Rep. Ireland: 1 800 977 841
Web Support: www.aldiwarranty.com
Model Number: 40887
8.
