| 3
SAFETY NOTICES
This manual contains information that is important for you to know
and understand before operating the Clorox Total 360™ Electrostatic
Sprayer. This information relates to protecting your safety and ensures
product reliability and performance. It is the owner’s responsibility to
ensure that all who operate this equipment read this manual.
Warnings
To help you recognize this information we use the warning symbols
below. Please read the manual carefully and pay special attention to
the symbols and warning labels. Warning labels indicate a potentially
hazardous situation which, if not avoided, could result in death or
serious injury.
WARNINGS
• Read and fully understand the Clorox Total 360™ Electrostatic
Sprayer Operators Manual prior to using the electrostatic sprayer.
• Read and fully understand Clorox-approved product labels prior to
using any liquid product with the Clorox Total 360™ Electrostatic
Sprayer.
• Clorox Total 360™ Electrostatic Sprayers are for indoor commercial
use ONLY.
• Clorox Total 360™ Electrostatic Sprayers should never be used in
a hazardous environment.
• Clorox Total 360™ Electrostatic Sprayers should never be used
in an area containing volatile chemicals. Nor should it be used in
any area containing volatile or explosive levels of gas, vapor or
particulates.
• Clorox Total 360™ Electrostatic Sprayers should never be used by
untrained personnel.
WARNINGS
PRESSURIZED EQUIPMENT HAZARD
Fluid from equipment that leaks or ruptures from a component can
splash in the eyes or on skin, causing serious injury. In order help
prevent a leak or rupture:
• Check hoses, tubes and couplings daily.
Replace worn or damaged parts immediately.
WARNINGS
PLASTIC PARTS CLEANING SOLVENT HAZARD
Many solvents can degrade plastic parts and cause them to fail,
which can lead to serious injury or property damage. In order to help
prevent against degradation:
• Use only compatible water-based solvents to
clean plastic structural pressure containing
parts.
• See technical data in this and all other
equipment instruction manuals. Read
fluid and solvent manufacturer’s SDSs and
recommendations prior to use.
WARNINGS
FIRE, EXPLOSION AND ELECTRIC SHOCK HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can
ignite or explode. To help prevent fire, explosion and electric shock:
• Electrostatic equipment must be used only by
trained, qualified personnel who understand
the requirements of this manual.
• Stop operation immediately if static sparking
occurs or you feel shock. Do not use equipment
until you identify and correct the problem.
• Use and clean equipment only in well-
ventilated area.
• Never spray a flammable chemical
(with a flashpoint less than 60˚C).
• Do not plug or unplug power cords or
turn lights on or off when flammable
fumes are present.
• Keep spray area free of debris, including solvents,
rags, gasoline or any flammable chemicals.
• Keep a working fire extinguisher in the work area.
