Cloos QINEO Micro 300, Инструкция по эксплуатации/Перечень запасных частей

Страница: 21 / 33

Micro 300
Cod.006.0001.1362
25/03/2013 v2.0
ENGLISH
21/32
12 JOBS MANAGEMENT
Personalised welding settings, or JOBs, can be saved in memory locations and subsequently uploaded.
The jobs are enabled only in MIG/MAG welding mode.
Up to 50 jobs can be saved (j01-j50).
12.1 SAVING A JOB
This function is available when welding mode is not active.
S4
Hold down the button for 3 seconds
 S A. J. x x The message appears on displays D1-D2
J.xx= number of the first free job
E2
Use the encoder to select the required job number
On selecting a currently occupied memory location, the job number flashes
If you confirm at this point, the new job will overwrite the previously saved settings
Exit without confirmation
Press any button (except S4)

This action will automatically close the menu
Exit with confirmation
S4
Press the following button
 This action will automatically close the menu
12.2 LOADING A USER JOB OF FACTORY SET JOB
This function is available when welding mode is not active.
S4
Press and release the button

LO. J. x x The message is shown on displays D1-D2 only when the jobs have been uploaded
J.xx= number of the latest job used
 n O J O b If there are no jobs in the memory the message is shown on displays D1-D2
E2
Use the encoder to select the number of the job to be uploaded
Exit without confirmation
Press any button (except S4)
 This action will automatically close the menu
Exit with confirmation
S4
Press the following button
The number of the loaded job remains shown on display D2
 J. x x
J.xx= number of the loaded job
 This action will automatically close the menu
12.3 DELETING A JOB
This function is available when welding mode is not active.
S4
Hold down the button for 3 seconds

S A. J. x x The message appears on displays D1-D2
J.xx= number of the latest job used
E1
Select “Er.” with the encoder
E2
Use the encoder to select the number of the job to be deleted
Exit without confirmation
Press any button (except S4)

This action will automatically close the menu
Exit with confirmation
(S4)
Press the following button
 This action will automatically close the menu