ClonerAlliance CA-989UL, Руководство пользователя

Страница: 25 / 79

ClonerAlliance UHD Lite User Manual
erAlliance UHD Lite is in the process of recording.
4. Press the Rec/Stop button again on ClonerAlliance UHD Lite, then the LED will blink blue/green alternately, which
indicates the recorded video is being saved.
5. When the LED turns solid blue or solid green from blinking blue/green alternately, it indicates the video has been saved
successfully. Then you can remove the USB flash drive now.
6. You can playback the recorded files on ClonerAlliance UHD Lite directly or on PC or on a smart TV.
3.4 Record videos with the remote included with ClonerAlliance
UHD Lite
1. Power on all devices, the video image from the video player will be displayed on TV and the LED will illuminate solid
blue or solid green. Solid blue indicates the output resolution is 4K30 and solid green indicates the output resolution is
1080p60 or below. If the top LED is blinking blue and green alternately, that indicates there is no input signal detected.
2. Before recording, you can easily switch H.264 or H.265 by pressing H.264/H.265 button on the front panel of Cloner-
Alliance UHD Lite. This option should be done with USB storage device connected to ClonerAlliance UHD Lite.
3. Press the Rec/Stop button on the Remote of ClonerAlliance UHD Lite, then the LED will blink blue or green, which
indicates the capture box is in the process of recording.
4. During recording process, you can adjust the volume of HDMI IN at any time. If you got Mic connected, you also can
adjust the volume of Mic during recording by pressing the volume up/down button on the Remote.
5. Press the Rec/Stop button again on the Remote, then the LED will blink blue/green alternately, which indicates the
recorded video is being saved.
6. When the LED turns solid blue or solid green from blinking blue/green alternately, it indicates the video has been saved
3.4. Record videos with the remote included with ClonerAlliance UHD Lite 20