8
Chapter3. How to Use Bluetooth CTP Gateway Function
This chaper explains how to use the Bluetooth CTP Gateway function of the BS-A101. In this
guide, it is assumed that the BS-A101 is in its factory-reset state. For more details of VoIP
Phone function of the BS-A101, please refer to the CP-101B user manual.
3.1. BS-A101 VoIP (H.323) Setting
IP to IP call mode is supported as default. If you want to connect your BS-A101 to a
Gatekeeper, please refer to the CP-101B user’s guide for more detailed VoIP configuration.
3.2. Phonizer Installation
①
Insert the CBT-CFA into your PocketPC.
②
Excute ‘setup.exe’.
③
Find Phonizer icon in Start bar after installing.
④
Configure Phonizer in the configuration window at your first trial of Phonizer
iPAQ 36XX : COM4 / 115200
iPAQ 3850 : COM4 / 115200
iPAQ 3870 : COM5 / 115200
iPAQ 39XX : COM6 / 115200
iPAQ 54XX : COM4 / 115200
Pocket LOOX : COM5 / 115200
[NOTE] There are three versions of Phonizer for each PocketPC version:
①
Phonizer_PPC2000_PCM_install.exe: Phonizer for CBT-CFA on PocketPC2000
②
Phonizer_PPC2002_PCM_install.exe: Phonizer for CFA on PocketPC2002
③
Phonizer_PPC2002_HCI_install.exe: Phonizer for CBT-CFS on PocketPC2002
Check the appropriate Phonizer version before installation
