ML892E-7
SECTION II
®
INSTALLATION
A. MOTOR
Mount the motor to the pedestal base using the plate,
the motor support arms, the spacers, the bolts, and
washers supplied (See Figure 2-1). Install pulley and
belt then check the following:
a. The motor is mounted so that the motor drive pulley
and sewing machine drive pulley are properly aligned.
b. The V-belt connecting the motor to the sewing machine
should be tensioned properly. It should be possible to
pull a correctly tensioned belt together between two
fingers within approximately 2 cm (3/4"). Excessive
tension may not only shorten the life of the bearings,
but could also affect the operation of the sewing machine.
A loose belt will affect positioning accuracy.
B. SYNCHRONIZER
1. Install pulley adapter is used (see figure below).
2. Now mount and secure synchronizer to pulley adapter.
3. Mount the synchronizer retaining rod assembly as shown in figure below.
2-1
FIG. 2-1
FIG. 2-2
