
FOOTREST/DROP SECTION
(Model 84430 only)
The drop section is located at the foot-end of the table and is shown below at left in a semi-extended position.
The friction lock drop section can be raised and lowered using the drop section levers on either side of the table.
To lower the drop section, place your hand under the upholstered top of the drop section and move the lever
forward towards the foot-end of the table. The lever must be kept in the forward position while gently lowering
the drop section. To raise the drop section, place your hand under the upholstered top and gently lift. The drop
section levers will automatically move forward and the drop section will lock into position wherever the lifting
motion is stopped. NEVER LUBRICATE THE LIFT MECHANISM.
Drop Section in the semi-raised position
Drop Section in the down position
OPTIONAL LOCKING CASTERS
(All Models)
Locking casters are an option on all models. The locking mechanism can be engaged by using your foot to
depressing the tab located at the rear of each caster. This action locks the swivel of the caster and acts as a
brake to minimize movement of the wheel.
ALL FOUR CASTERS MUST BE LOCKED TO ENSURE MINIMAL
MOVEMENT OF THE TABLE.
IMPORTANT:
Casters can not be added in the field without consulting the factory, due to the need to replace
the foot bar on the base to accommodate the new casters. Please contact the factory for necessary information
before proceeding.
Caster in the mobile position.
Caster in the lock position.
7