ASSEMBLY INSTRUCTIONS FOR ADJUSTABLE BALANCE PLATFORM
MODEL 7360
MAXIMUM WEIGHT CAPACITY 350 LBS
Thank you for counting on Clinton to meet your medical
equipment needs by purchasing this quality equipment.
Below are easy to follow instructions on how to properly
assemble your equipment. Please contact us at 800-441-
9131 if you experience any difficulty with the assembly or
have questions.
INTENDED USE.
Clinton’s Adjustable Balance Platform,
model 7360, are specifically designed and engineered
for physical therapy use only. Combination of weight on
the equipment is not to exceed a total of 350 lbs. Using
this equipment for unintended purposes could result in
damage to the equipment and serious injury.
2
1
3
Tighten with a 5/8" socket wrench.
Position uprights on carpeted platform over
bolt inserts. Secure each upright with four (4)
2
1
/
4
" hex head bolts and a 15/16"
washer on each bolt.
Insert a star knob into each upright and
tighten when desired position is achieved.
1140 East Edison St., York, PA 17403
800-441-9131 • 717-848-3519 • Toll-Free Fax 866-522-1233
Fax 717-843-5871 • www.clinton-ind.com
© Copyright 2014, Clinton Industries, Inc.
CLEANING
Clinton products are built to be durable. With proper care,
your Clinton equipment will provide years of superior looks
and performance. Before using any cleaning agents, try
them on a small inconspicuous area to insure that they will
not harm the surface finish. Damage from cleaning is not
covered under the warranty.
Do not use alcohol based
cleaning agents.
Periodically check that all parts are secure and operating
properly.
Limited Warranty
ON FRAME &
ELECTRICAL
COMPONENTS
Limited
Warranty
Clinton Industries warrants its products to
be free of defects in workmanship for five
years from the date of purchase. This warranty does not
include damage resulting from accident, abuse or misuse,
alteration, or negligence of the product and expressly
excludes normal wear of parts (including but not limited to
vinyl). Contact Clinton for full warranty details.
Hardware
(16) 2
1
/
4
" Hex Head Bolts
(16) 15/16" washers
(4) Black Star Knobs
Tools Required
5/8" Socket Wrench
Time Required
About 15 Minutes
FOR SAFETY PURPOSES, TAKE TIME TO CHECK
ALL BOLTS TO INSURE THAT THEY ARE
SECURELY TIGHTENED AND THAT THE
PLATFORM HAS BEEN PROPERLY ASSEMBLED
ACCORDING TO THESE INSTRUCTIONS.
