4
5
3
Attach spanner by sliding it into the grooves
in the leg braces and fastening using the black
1
3
/
4
" wood screws.
Screw in center leg levellers on the two center
legs. Invert and level making sure the center legs
rest on the floor.
Attach the leg braces to the inside of each
end of the table with the black 1
1
/
2
" truss
head bolts.
7
Clean with disinfectant according to Cleaning
Guidelines on the back page of these
instructions prior to use.
FOR SAFETY PURPOSES, TAKE TIME TO CHECK ALL SCREWS, BOLTS AND NUTS TO INSURE THAT
THEY ARE SECURELY TIGHTENED AND THAT THE TABLE HAS BEEN PROPERLY ASSEMBLED
ACCORDING TO THESE INSTRUCTIONS.
SHELF ASSEMBLY
With the table in an upright position, apply
adhesive backed Velcro
®
strips to top edge of
H-braces on both ends of the table. Place the full-length
shelf on the spanner with the Velcro
®
side over the Velcro
®
on the braces.
6
Adhesive backed Velcro
®
strips
