7
Ethernet:
• Dynamic IP
:
Turn this setting ON to have the DVR automatically place your network settings into the
corresponding fields. Click the
✔
save icon to apply the settings.
Tip:
When your “Check Internet” test is successful, turn Dynamic IP back off and click the
✔
save icon again in order to avoid the DVR grabbing an invalid IP address in the future.
See Check Internet below for more information.
• Host Name
:
Input a desired host name.
• IP Address
:
Input an IP address for the DVR. (Dynamic IP must be off to edit this selection)
• Subnet Mask
:
Input the Subnet Mask here. (Dynamic IP must be off to edit this selection)
• Gateway
:
Input the Gateway Address here. (Dynamic IP must be off to edit this selection)
• DNS Server
:
Input the DNS Server Address here. (Dynamic IP must be off to edit this selection)
• Check Internet
:
Press “Start” next to Check Internet to check the internet status.
If Successful: “Internet access has succeeded”
If Unsuccessful: “Internet access has failed”
Ethernet Setup / Network /
Ethernet:
In this category you can configure the Serial, DDNS, and E-mail settings.
SETUP
For further info on these fields, see our support page at www.clintonelectronics.com.