Clinton Electronics CE-CC115-W, Руководство пользователя

Страница: 16 / 20

28
Digital Day&Night Color Camera
■
Camera Operation
5) When the camera ID is complete, select a position for the name to be
displayed.
①
Move the cursor onto 'POS' and then press the SET button.
②
The ID will appear in the top left
corner.
③
Select the position where the ID is
to be displayed by using the 4 directional
buttons, and then press the SET button.
6) Select 'END' and press the SET button to complete ID input.
●
COLOR
- AUTO : This camera has an IR Cut Filter and automatically changes to the
appropriate mode dependant on lighting levels. COLOR mode is
selected during daylight and B/W mode at night time.
- ON : The color mode is selected by default, and the modes do not
change automatically.
29
Digital Day&Night Color Camera
●
SYNC : Two sychronisation modes are available, INTERNAL and
EXTERNAL LINE-LOCK. In LINE-LOCK mode, it synchronises the
video signal between cameras without a synchronous generator.
The line-lock synchronisation is only used in areas of 60Hz
(NTSC Models) / 50Hz (PAL Models).
- INT : Internal synchronisation
- LL : External line-lock synchronisation
ㆍ
If ÔLLÕ is selected, it can be adjusted to the desired phase.
Press the SET button.
ㆍ
Adjust to the desired phase from 0 to 359.
ㆍ
When the AGC is turned off, COLOR does not operate.
ㆍ
When an infrared light is used, there may be a problem with focusing.
Note
ㆍ
When the mains frequency is 50Hz, the line-lock mode (NTSC Models) cannot be used.
ㆍ
When the mains frequency is 60Hz, the line-lock mode (PAL Models) cannot be used.
ㆍ
ÔSyncÕ mode is fixed to ÔINTÕ in DC12V input power
Note