9.
1
2
3
4
5
6
7 8
Product description
1. Carry strap anchor point
2. [
]
release to switch off.
3. [ TUN+ ] [ TUN− ] Next/previous preset station
lower frequency.
4. [ ENTER
Manual, Pre-scan (PS) and Select preset
station (MEM). Saves station presets.
5. [ VOL+ ] [ VOL− ] Volume
6. [
] On/off, select FM radio or DAB radio mode
7. Torch
8. 3.5 mm headphone socket
Note:
If [ ENTER ] (4) and [
] (6) are held in at
the same time for 10 sec the radio will enter a
software update mode which is only for factory
use. The radio will then be locked and unusable.
To reset: At the bottom of the 3.5 mm headphone
socket (8) there is reset button. Carefully press
the button using a suitable object such as a
straightened paper clip. The button is at the front
of the base of the 3.5 mm socket as shown in
the picture.
Torch on/off. Hold in to switch on,
9
4
