-10-
Reset the indoor temperature and humidity MIN/MAX value
Press the
MIN/MAX
key for 3 seconds, the above individual minimum or
maximum record will be reset to zero
4.3 Outdoor Temperature Mode
Press the
MODE
key to make the arrow point to OUTDOOR TEMPERATURE
display section
-
Press and release
CH/+
key to toggle between the outdoor sensor
1,2,3 ( If more than 1 sensor is used)
-
Press the
-/MIN/MAX
key to display the following values:
1. Current channel outdoor temperature maximum
2. Current channel outdoor temperature minimum
3. Current outdoor temperature
-
Reset the outdoor temperature
MIN/MAX
value
-
Press the
MIN/MAX
key for 3 seconds, the outdoor temperature
minimum or maximum record will be reset to current temperature
value. It is required to reset the outdoor
MIN/MAX
temperature
records of different channels separately (if there are more than
1 wireless sensor used). In outdoor temperature mode, press the
CH/ +
button to select a channel. The channel ID will be displayed besides
the outdoor temperature reading.
5.
Troubleshooting
Q 1. No signal from remote sensor
A There can be many reasons for this, the following steps should
help you troubleshoot this problem.
1.1 Make sure that the batteries in the remote sensor are not
depleted.
1.2 Reduce the distance between transmitter and receiver
1.3 Remove the batteries from the base station and the remote
sensor and reset the weather station in the right order as described
in section 2 of this manual.
85119 Wireless Weather Station Manual_85119 Wireless Weather Station Man