climecon.fi
© Climecon
3
Installation instructions ECO2
2x
1
5
2
4
Note! Connection work may be performed only by a person with necessary professional skills.
Страница 1: ...of the electronic part of the supply air unit as shown on Figure 2 2 Connect the grounding to the separate ground terminal in the supply air unit as shown on Figure 2 3 Connect the supply air unit of the ECO series to the thermostat by means of the KLMA cable as shown on Figure 2 4 You can activate temperature drop function by connecting terminals Z1 and G0 in the thermostat as shown on figure 5 5...
Страница 2: ...visible on the display 7 6 After you have made all the necessary changes reinstall the cover 2 and the system is ready for use Installation of the thermostat 1 Bring the cable intended for the thermostat unit KLMA from the supply air unit either to the instrument box 60 mm spacing between holes or directly to a surface mounted ECO thermostat 2 Remove the cover 2 of the thermostat from the rear par...
Страница 3: ...climecon fi Climecon 3 Installation instructions ECO2 2x 1 3 5 2 4 Note Connection work may be performed only by a person with necessary professional skills ...
Страница 4: ... 4 6 Note Connection work may be performed only by a person with necessary professional skills Warning 230V voltage inside Turn off the supply voltage before maintenance Note Check also the condition of the supply air filter of the air handling unit 1 0 2x ...