www.climecon.fi
© Climecon
3
Installation instructions ECO4
4x
60
190
160
1
5
6
2
4
Note! Connection work may be performed only by a person with necessary professional skills.
Страница 1: ...f the electronic part of the supply air unit as shown on Figure 2 2 Connect the grounding to the separate ground terminal in the supply air unit as shown on Figure 2 3 Connect the supply air unit of the RCL ECO series to the regulator by means of the KLMA cable as shown on Figure 2 4 You can activate temperature drop function by connecting terminals Z1 and G0 in the regulator as shown on figure 5 ...
Страница 2: ...op is visible on the display 7 6 After you have made all the necessary changes reinstall the cover 2 and the system is ready for use Installation of the regulator 1 Bring the cable intended for the regulator unit KLMA from the supply air unit either to the instrument box 60 mm spacing bet ween holes or directly to a surface mounted ECO regulator 2 Remove the cover 2 of the regulator from the rear ...
Страница 3: ...www climecon fi Climecon 3 Installation instructions ECO4 4x 60 190 160 4x 1 3 5 6 2 4 Note Connection work may be performed only by a person with necessary professional skills ...
Страница 4: ...limecon 4 Service instruction ECO4 1 3 5 2 4 6 Note Connection work may be performed only by a person with necessary professional skills 1 0 4x Warning 230V voltage inside Turn off the supply voltage before maintenance ...
