Climax VM2350, Руководство по эксплуатации

Страница: 34 / 88

Page 22 VM2350-2500-2600S,C Operating Manual
4.4.3 Mounting with collar and mounting system
The standard scope of supply also
includes a collar band mounting
system for locating the machine
onto valve bodies without flange.
In this case, the collar band shafts
are bolted to the clamping shoes by
means of socket head screws M12
x 35 according to DIN 912 (use
washers dia. 13 x 35 x 5 mm, con-
tained in standard scope of supply).
The universal clamping device
should be mounted with the collar
band shafts resting onto the upper
rim of the valve body.
On the bottom end of the collar
band shafts, two set screws are pro-
vided to support the collar band
shaft against the valve body.
In this connection, the angular
clamps should be slightly loose to
ensure that the collar band shafts
are resting against the valve body.
After tightening the collar band, the
angular clamps are securely
clamped.
After the band is located around the
valve body and the collar band
shafts, it is securely fastened. On
the bottom of the collar band
shafts, a raised surface is provided
to avoid the collar band from slip-
ping.
The collar band locks automati-
cally and fixates the universal
clamping device to the valve body.
F
IGURE
4-10. M
OUNTING OF UNIVERSAL CLAMPING DEVICE
TO A VALVE BODY WITHOUT FLANGE BY
MEANS OF COLLAR BAND SHAFTS
(
COLLAR
BAND IS NOT SHOWN
)
F
IGURE
4-11. P
OSITIONING OF COLLAR BAND INTO FASTENING
SYSTEM
F
IGURE
4-12. F
ASTENING OF THE COLLAR BAND