Climax VM1700S, Руководство по эксплуатации

Страница: 19 / 94

P/N 90075, Rev. 1 Page 7
2 OVERVIEW
IN THIS CHAPTER:
2.1 F
EATURES AND COMPONENTS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
2.2 S
PECIFICATIONS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
2.1 F
EATURES AND COMPONENTS
The gate valve grinding and lapping machine, Model VM 1700(S), respectively
VM1900(S) (in the following called Gate Valve Grinder) is specifically designed
for grinding and lapping (with the extension …S for grinding only) of gate valve
seats, size DN 200 – DN 700, respectively to DN 1000.
The specifications in Section 2.2 on page 10 and all other technical data must be
met. In addition, Section 1.5 on page 4, Section 4 on page 27, and Section 5 on
page 37 must be followed to ensure a safe operation of the Gate Valve Grinder.
Any faults during the warranty period will be recovered according to CLIMAX’s
terms of warranty. Excluded are damages due to dismantling the machine by cus-
tomer’s maintenance personnel. Damages attributable to normal wear and tear,
overload or improper handling will be excluded from warranty.
This operating manual is not an extension of CLIMAX’ General Conditions of
Sale. Not all accessories are included in the basic scope of supply. Options are also
described. For instance, the basic machine includes an electric or a pneumatic
drive system. Optionally, the machine can be delivered with electric and pneumatic
drive system. However, both drive systems are described in this operating manual.
There is a description for lapping of valves in this operating manual. However, for
machines with the extension ...S, lapping equipment is not in the scope of supply.
CAUTION
The Gate Valve Grinder is only to be used as prescribed. If the
Gate Valve Grinder is not used accordingly, safe operation is not
guaranteed.
Any danger to the life and health of people and all damage to the
Gate Valve Grinder resulting from use not as prescribed will be
customer’s responsibility.
Any modifications of the Gate Valve Grinder made by the
customer will be at his own responsibility. This applies especially
for any changes that will not comply with the safety requirements
of the Gate Valve Grinder.