Climax VM1700S, Руководство по эксплуатации

Страница: 36 / 94

Page 24 VM1700S-1900S Operating Manual
3. Close the flap and clamp the
machine arm. If additional
height adjustment of the
machine arm is required take
the machine arm out of the tilt-
ing adapter, readjust the bracket
and replace the machine arm
again.
To avoid any backlash in the
machine arm clamping mechanism
two adjust screws are provided. To
eliminate the backlash loosen the
flap slightly, adjust the backlash and
clamp the machine arm again.
Check that whenever the machine
arm is taken out of the tilting
adapter, the backlash adjustment
system is opened to ensure easy
relocating of machine arm (for
example, when changing the abra-
sives).
F
IGURE
3-16. M
ACHINE ARM IN CLAMPED POSITION
F
IGURE
3-17. A
DJUSTING THE BACKLASH OF THE CLAMPING
OF THE TILTING ADAPTER