ZigBee routers to improve signal strength.
DO NOT
use a ZigBee Router without backup battery. A
ZigBee router without battery will be powered down during AC power failure and the Smoke
Detector connected to the router will lose connection with ZigBee network. You should plan your
Smoke Detector installation location using only ZigBee router with backup battery.
Maintenance
The top cover and the smoke detecting chamber can be detached from the Smoke Detector for
maintenance. Follow the steps below to maintain the smoke detecting chamber:
1.
Remove the top cover by rotating the top cover counter-clockwise, then remove the smoke
detecting chamber
2.
Pull out the anti-insect mesh inside the chamber and clean the chamber and mesh with a brush or
water.
3.
Re-insert the anti-insect mesh into the chamber and insert the chamber back onto the Smoke
Detector. Please make sure the chamber is dry before re-inserting back onto the Smoke Detector.
4.
Insert the top cover back onto the Smoke Detector. The top cover includes 3 insertion hooks to fit
into the Smoke Detector. Each hook has a number next to it. Match these numbers with the
numbers of insertion holes on the Smoke Detector.
Appendix
(For developers only)
Smoke Detector Cluster ID
