Smoke Detector
SD-16-ZBS / SD-16SL-ZBS
Introduction
SD-16(SL)-ZBS is a ZigBee Smoke Detector. It is capable of sending wireless signals to the coordinator
in the ZigBee network upon detection of smoke particles. The Smoke Detector is designed to be
mounted on ceiling or top of stairwells when smoke would concentrate to raise alarm timely and protect
your home from fire hazards.
The Smoke Detector utilizes ZigBee technology for wireless signal transmission. ZigBee is a wireless
communication protocol that is reliable and has low power consumption and high transmission efficiency.
Based on IEEE802.15.4 standard, ZigBee allows a large amount of devices to be included in a network
and coordinated for data exchange and signal transmission
The Smoke Detector serves as an end device in the ZigBee network. It can be included in the ZigBee
network to transmit signal upon activation, but cannot permit any other ZigBee device to join the network
through the Smoke Detector.
The SD-16 Series Smoke Detector includes following models, the models differ in battery used.
SD-16ZBS
SD-16SL-ZBS
Parts Identification
1. Red LED
- Continuous quick flashes
The Smoke Detector is alarming.
- Two quick flashes
The Smoke Detector has successfully joined a ZigBee network after
factory reset.
- Flashes once every 20 minutes:
The Smoke Detector has lost connection to its current ZigBee
network.
- Flashes every 4 seconds:
Battery Exhausted
- Flashes every 2 seconds:
The Smoke Detector is under warm-up and self-calibration process
- Flashes every second:
The Smoke Detector is in Alarm Silence mode.
2. Amber LED
- Flashes every 4 seconds:
Battery Exhausted
- Flashes every 5 seconds:
Auto-calibration has failed.
3. Function Button
- Press the button once to send a supervision signal / test Smoke
Detector
- Press the button once during alarm to silence the alarm.
- Press and hold the button for 10 seconds then release to reset the
Smoke Detector.
- Press and hold the button for 20 seconds then release to recalibrate
the Smoke Detector.
4. Buzzer
5.
Mounting Hole
The Hook of the Mounting Bracket can hook into this Mounting Hole.
6.
Battery compartment
The battery used varies according to Smoke Detector model number.
7.
Battery Compartment Cover
