Climax Mobile Lite-R23, Руководство по установке, Страница: 22 / 46


Adjust the speaker volume of Mobile Lite from a scale of 1-5, where
1 = minimum speaker volume
5 = maximum speaker volume

Test Mode timeout

Select a time limit (1-10 minutes) for Test Mode.

After the Mobile Lite enters Test Mode, if the Active Button is not
pressed within the programmed period, the Mobile Lite will
automatically come out of test mode.

Auto Check-In Interval:

You can select the length of the interval between auto check-in
reports.

When the Mobile Lite makes the auto check-in report to CMS, its
location info will also be updated and sent with the report.

There will be no auto check-in report if you select “Disable.”

Whenever Mobile Lite is programmed, the auto check-in timer will be
reset.

Auto Check-In Offset:

After Mobile Lite is rebooted, reset or programmed, the system will
start counting down the time for the first Auto check-in report.

Mobile Lite will send the first check-in report according to the setting
of Auto Check-In Offset time. Afterwards, Mobile Lite will send
reports according to the setting of Auto Check-in Interval

Mobile Fall Detection

Select to enable or disable the fall detection function of Mobile Lite.

Mobile Fall Detection Sensitivity:

Select a preferred sensitivity level for Mobile Fall Detection. (5 is the
highest sensitivity level while 1 is the lowest sensitivity level.)

Caller ID: Caller ID #1 & Caller ID #2

The device will instantly pick up the call if the incoming caller ID
matches with the number(s) programmed in this function.

The device will match the numbers starting from the last digit. For
example, if a number string 321 is programmed, the device will
instantly pick up any call that has a caller ID of 321 as the last 3
digits.

Up to 15 numeric digits are allowed per setting.
19