2
After activation, the Wrist Transmitter will automatically check battery voltage every 20-24 hours.
If low battery is detected 3 times in a row, the Wrist Transmitter will enter low battery status and
transmit low battery signal every 12 hours.
<NOTE>
If Auto Low Battery detection is not activated, the Wrist Transmitter will not automatically check
battery status. You will need to check battery status by manually pressing the Active Button.
Once Auto Low Battery Detection is activated, it cannot be deactivated later in any
circumstances.
Pendant Lanyard & Wrist Band Configuration
The Transmitter can be worn as a Pendant with lanyard or a Wrist Watch with wrist band. Please refer to
below section for Pendant lanyard and Wrist Band attachment/removal instruction.
Pendant Lanyard Attachment & Removal:
Attachment:
Step 1. Flip over the Transmitter to the back side as
Figure 1.
Step 2. Gently hook the buckle at the back of the Transmitter as
Figure 1.
Figure 1.
Removal:
Step 1. Turn over the Transmitter to the back side and hold it with your left hand as shown in
Figure 2.
Step 2. While holding the Transmitter, use your right hand to hold the cord as shown in
Figure 3
.
Step 3. Pull the cord away gently in parallel direction to the Transmitter as shown in
Figure 4.
Figure 2.
Figure 3.
Figure 4.
Wrist Band Attachment & Removal:
Attachment:
Step 1. Flip over both the Transmitter and the Wrist band to the back side.
Step 2. Use the buckles on the wrist band and gently hook it on the back of the transmitter as shown in
Figure 5.
