CLIMAVENETA MICS FF, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 32

Dimensione 0072 0092 0122 0152 0182
H 1725 1725 1725 1725 1725 mm
L 1040 1040 1630 1630 1630 mm
P 790 790 790 790 790 mm
Gross weight MICS 340 360 440 480 510 kg
Gross weight MICS-N 360 380 470 510 540 kg
MICS / MICS-N
3
Italiano 05/07
The
MICS / MICS-N
chiller can be identified by the:
Rating plate
Giving the technical and performance data of the unit. If
this is lost, ask the After Sales Service for a replacement.
Tampering with or
the
removal or
absence of rating plates or
other means enabling the
unit to be identified causes
problems during installa-
tion and maintenance.
IDENTIFICATION
POTENZA FRIGO RIFERA ------------------- kW
POTENZA TERMICA ------------------- kW
TIPO REFRIGER ANTE -------------------
CARICA REFRIGER ANTE ------------------- Kg
PRESSIONE MASSIMA ------------------- bar
ALIMENTAZIONE ELE TTRICA DI PO TENZA ------------------- V---Hz
ALIMENTAZIONE ELE TTRICA AUSILIARI ------------------- V---Hz
POTENZA ELE TTRICA MAX. ASSORBITA ------------------- kW
CORRENTE MAX. ASSORBITA ------------------- A
CORRENTE DI SPUNT O ------------------- A
SCHEMA ELETTRICO ------------------- N °
PESO IN FUNZIONAMENT O ------------------- Kg
ANNO DI FABBRIC AZIONE -------------------
RECEIVING AND HANDLING THE PRODUCT
The
MICS / MICS-N
chillers are supplied accompanied
by:
- installation, operating and service manual;
- guarantee certificate;
- CE declaration;
These are contained in a plastic bag attached to the top of
the chiller.
The unit should always be handled by qualified personnel
using equipment adequate for the weight of the chiller. If a
forklift truck is used, insert the forks under the base, spa-
cing the forks as wide apart as possible. If a crane is used,
pass the cables through the bottom of the base, making
sure they do not exert pressure on the unit. Once the
packaging has been removed, the appliance can be lifted
and moved by inserting two metal tubes (max. diameter
1”) into the special holes in the base and using suitable
handling equipment.
The installation, operating and ser vice
manual is an integral part of the unit and should
therefore be read and kept carefully.
It is recommended that the packaging should
not be removed until the unit is located in the
installation site.
Do not dispose of packaging materials in the envi-
ronment or leave them within reach of children as
they may represent a hazard.
During transport, the chiller should be kept in a
vertical position
U A I
I A