Climate Technology Bonaire Cool Change Series Скачать руководство пользователя страница 8

Integra

Owner’s Manual

Page 8

OPERATION MODE - MANUAL, AUTO & ECONOMY

Your air conditioner can be operated in three different modes either manual, automatic or
economy.

MANUAL MODE

In this mode, you can control the tan and pump settings manually. To select the manual
operation press the "MANUAL/AUTO/ECO" button until 'MANUAL' is shown in the display. In
manual mode, you can select your desired comfort level by controlling fan speed (12
graduated bars-from LO SPEED to HI SPEED) and pump (FRESH or COOL). To select fan
speed press and hold the UP or DOWN button until your desired fan speed is reached. To
turn on the pump, press the "COOL" button until "COOL" is shown in the display. To turn off
the pump (fan only), press the "COOL" button until "FRESH is indicated.

AUTO MODE

In this mode, the air conditioner automatically controls the fan and pump settings. All you need
to set 'IS your desired comfort level. To select the automatic operation press the
"MANUAL/AUTO/ECO" button until "AUTO" is shown in the display. In auto mode you can
select your desired comfort level. (12 graduated bars - from LO TEMP to Hi TEMP). To adjust
the desired comfort level press and hold the UP or DOWN button until your desired comfort
level is reached.

ECONOMY MODE

As per Auto mode but uses less power. To select the automatic economy operation press the
"MANUAL/AUTO/ECO" button until "AUTO" and "ECONOMY" are shown in the display. In
economy mode, you can select your desired comfort level by pressing the UP or DOWN
button.

NOTE:

 There may be a short delay before the fan and the pump start in AUTO or ECONOMY

mode.

Содержание Bonaire Cool Change Series

















Отзывы: