CLIMASTAR DK INV 2000 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 20

CLIMASTAR DK INV 2000 Скачать руководство пользователя страница 2

Congratulations on your purchase of your SILICIUM HYBRID INVERTER
UNIT!!
The product you have just purchased has undergone numerous tests and
inspections to guarantee the highest quality.
We hope it will give you entire satisfaction.
We are sure you will be happy with it because it represents the state of the
art in the technology of home air conditioning.
By following the suggestions contained in this manual, the air conditioning
unit that you have purchased will operate without problems giving you
optimum room temperatures with minimum energy costs.

CLIMASTAR

INDEX

1.

GENERAL

1.1.

Conformity______________________________________________3

1.2.

General Warnings________________________________________3

1.3.

Fundamental safety rules__________________________________4

1.4.

Product range____________________________________________5

1.5.

Nominal technical features_________________________________5

1.6.

Overall dimensions_______________________________________5

2.

INSTALLATION___________________________________________6

2.1.

Positioning the unit.______________________________________6

2.2.

Installation modes._______________________________________6

2.3.

Minimum installation distances____________________________7

2.4.

Side opening.____________________________________________7

2.5.

Wall installation__________________________________________8

2.6.

Hydraulic connections.____________________________________8

2.7.

Condensation discharge___________________________________10

2.8.

Filling the system.________________________________________11

2.9.

Evacuating air while filling the system.______________________11

2.10.

Electrical connections.________________________________12

2.10.1.

Connecting the control board.____________________12

2.10.2.

Connections on electronic board.__________________13

2.11.

Error signals on display.______________________________14

2.12.

Dual-Kherr front panel fitting_________________________14

3.

MAINTENANCE___________________________________________15

3.1.

Cleaning the outside______________________________________15

3.2.

Cleaning the air suction filter______________________________15

3.3.

Energy saving tips_______________________________________17

4.

TROUBLESHOOTING_____________________________________17

4.1.

Table of anomalies and remedies__________________________18

«
1
2
3
4
...
»

Содержание DK INV 2000





















Отзывы:

Нет отзывов