Clifford Virtual Key 2UK, Руководство пользователя, Страница: 4 / 8

Main te nance
Your Clifford VirtualKey 2 AutoImmobiliser system requires no maintenance.
This product, like any electrical device in your vehicle, requires your car battery be
in proper working order and fully charged. To ensure proper operation, periodically
have your vehicle battery “load-checked” at any local garage/mechanic. Also make
sure the battery cables and connections are tight and free from corrosion.
Op era tion of your Vir tu alKey 2 Auto Im mo bi liser
NOTE: In the event of one of your trans pond ers be ing lost or sto len, please
fol low the pro ce dure below to de lete the code(s) of lost or sto len
Vir tu alKey(s). In the event of both trans ponder keys be ing lost or sto len, you
will be re quired to re turn to the Clif ford Dealer who in stalled your sys tem so
that the unit may be re turned to Clif ford to have the lost or sto len keys
re moved from mem ory and new Vir tu alK eys added.
Proper At tach ment of the Vir tu alKey to the Ig ni tion Key
The VirtualKey
MUST BE ATTACHED DIRECTLY
to the vehicle’s ignition key
and
NOT
to a keychain. The reason is that the VirtualKey code must be
electronically read through the airwaves by the AutoImmobiliser’s antenna, which is
located near your vehicle’s ignition switch. Since the range is, by design, only a few
inches, the closer the VirtualKey is to the antenna, the better is the likelihood of
trouble-free operation.
To drive your ve hi cle
When the system is active, the dashboard or console-mounted LED will be flashing.
When you turn on the ignition, the Virtual Key comes into close proximity to the
VirtualKey detector mounted near the ignition switch. The system instantly reads
and verifies the secret code of the VirtualKey and, if it matches, releases its
electronic immobilisation of your vehicle’s starter motor and ignition system or
electronic fuel pump. The LED turns off to confirm this.
AutoArming
There’s nothing you need to do to set the VirtualKey 2 AutoImmobiliser. Thirty
seconds after you turn off the ignition, exit and close all the doors, the system
automatically engages its two immobilisation points. When it does so, the LED
status indicator will flash repeatedly. Even if a thief has an exact duplicate of your
car key, he still won’t be able to start the engine.
4
D:...irtualKey 2 complete owners.vp
Mon Apr 12 18:11:06 1999
Composite